| View previous topic :: View next topic |
| Author |
Message |
fischershaw
Joined: 02 May 2005
Posts: 8
Location: Woodinville,WA,USA
|
 Posted: Mon May 02, 2005 12:56 am Post subject: Acting on SNMP traps |
 |
|
| Does Minuteman have any simple s/w (or source code example) that one can install on multiple machines to act on traps sent by the netcard attached to the ups unit? |
|
| Back to top |
|
 |
jeff
Joined: 19 Jan 2006
Posts: 187
|
| Posted: Thu Jan 19, 2006 2:37 pm Post subject: SNMP |
|
|
Fischershaw,
You will need an Network Management System (NMS) such as Open View in order to receive a trap from the SNMP card. Inside the NMS you can run a script to shut down the PC. The SNMP card does not have the capability to shut down the PC by itself.
Jeff |
|
| Back to top |
|
|
daverosi
Joined: 06 Feb 2006
Posts: 9
Location: Hartford, CT
|
| Posted: Fri Dec 18, 2009 8:30 am Post subject: Logalot works too |
|
|
We use Plixer's Logalot to do this, as well as shut down Network ports that reach thresholds too high based on Broadcast or Error rates.
Dave R |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
