| View previous topic :: View next topic |
| Author |
Message |
ravachol
Joined: 22 Sep 2008
Posts: 5
|
 Posted: Mon Sep 22, 2008 12:38 pm Post subject: Pro 650 |
 |
|
Hi there,
I have second hand UPS Minuteman Pro 650. I have two major questions, first UPS baterry control lights, I`ve measured the batery, it shows around 10 Volts and UPS is beepin very weakly each cca 10 seconds. How can I solve this problem? Second, how can I set up that device under WinXP, I did not found any driver on the net... I`ve got taht UPS without any equipment, but I am using for computer connection 9pin male/female connector from another UPS system.
Thanks! |
|
| Back to top |
|
 |
Steve
Joined: 25 Jul 2005
Posts: 121
|
| Posted: Mon Sep 22, 2008 2:18 pm Post subject: |
|
|
You need (1) 12 V 12 Amp Hr. battery. Out part number is B00009 for
PRO650. Batteries last 3-5 years. |
|
| Back to top |
|
|
ravachol
Joined: 22 Sep 2008
Posts: 5
|
| Posted: Tue Sep 23, 2008 12:49 am Post subject: |
|
|
| Should I use the battery from other manufacturers? For example Panasonic or somebody else, with the same parameters? And what about the cable, it is enough to use 9 pin male/female (RS232) cable from another UPS? I`ve got one from APC (cable), or do I need original. |
|
| Back to top |
|
|
Steve
Joined: 25 Jul 2005
Posts: 121
|
| Posted: Tue Sep 23, 2008 7:29 am Post subject: |
|
|
Hello,
You need (1) 12 V 12 Amp Hr. battery. The leads are F2. It is a lead acid
battery. The dimensions are 7 x 3 x 4 in. You need to use our 9 pin cable. |
|
| Back to top |
|
|
ravachol
Joined: 22 Sep 2008
Posts: 5
|
| Posted: Tue Sep 23, 2008 7:33 am Post subject: |
|
|
| Thanks for answer, is it possible to buy that cable somewhere in Europe? Iam from Czech republic... |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
