| View previous topic :: View next topic |
| Author |
Message |
boards1_88
Joined: 09 Nov 2006
Posts: 5
Location: Dallas, TX
|
 Posted: Thu Nov 09, 2006 10:48 am Post subject: NetAgent with CPE3000RM |
 |
|
How do you configure (HTTP method) the NetAgent card for the "Number of Batteries" (which is 8-12V7aH for the 3000RM), the "Battery Full Charge Voltage" and "Battery Exhausted Charge Voltage" so that the "Current Status" page displays the correct "Battery Capacity" and "Battery Voltage" values?
Thanks,
Jason |
|
| Back to top |
|
 |
jeff
Joined: 19 Jan 2006
Posts: 187
|
| Posted: Thu Nov 09, 2006 1:04 pm Post subject: Net Agent |
|
|
boards1_88,
Go to the configuration of hte UPS.
You can change those numbers in that field.
Jeff |
|
| Back to top |
|
|
boards1_88
Joined: 09 Nov 2006
Posts: 5
Location: Dallas, TX
|
| Posted: Thu Nov 09, 2006 1:46 pm Post subject: |
|
|
| Yes, I know where to change the values, but what are the correct values for the "Battery Full Charge Voltage" and "Battery Exhausted Charge Voltage"? I know to put 8 in for "Number of Batteries". If I put in 12 for the "Battery Full Charge Voltage" and say 10 for "Battery Exhausted Charge Voltage", I get a "Battery Capacity" of 51% on the "Current Status" page, even though I know the batteries are fully charged. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
