Wireless Communications Demand Reliable Power

Distributed Antenna Systems (DAS), like all mission critical applications, require reliable power protection solutions.

A properly implemented power protection system eliminates the possibility of a system outage or electrical damage due to unexpected power problems such as a surge, spike, or brownout. Minuteman's product line has become a favorite of both users and installers of DAS installations thanks to an unbeatable combination of tailored solutions, critical features that meet national and local regulations, plus outstanding value.

  1. DAS Info
  2. Why DAS?
  3. Public Safety
  4. Power Requirements
  5. Solutions
  6. 1-on-1 Support

The Need for Power Protection

Keeping Distributed Antenna Systems (DAS) powered up and fully protected is not only essential, most local government entities mandate that a DAS system is fully functional for emergency responders' communications inside a facility - even when power is out. To go a step further, these vital communications systems are often required by local regulations to be fully functional for 12, and even 24 hours.

Minuteman Power Technologies specializes in providing long battery backup solutions that meet or exceed the local jurisdiction requirements for keeping DAS systems up and running. As the early pioneer in long runtime battery backup systems, Minuteman has the experience and expertise that uniquely positions us as the go-to power solution provider for DAS applications.

Why DAS?

Just like we have become accustomed to having electricity 24/7, the latest utility that we expect to be available at all times is wireless communications. Wireless systems and the infrastructure that supports them have become pervasive, and the expectation is that wireless services must be available at all times in order for us to communicate with friends and family, as well as conduct business without interruption. The ability to be mobile and still communicate is now an expectation, no matter where we are or what we are doing inside or outside. Wireless communications is now the fourth utility. Cell phone traffic has increased exponentially, and all cell carriers must stay out in front of capacity demand from its users. While voice traffic has increased slightly each year, the demand for cell phone data internet browsing and streaming video has skyrocketed.

The landscape is covered with cellular towers, but the vast majority of cellular connections (70-80% for both voice and/or data) originate inside buildings. As stated earlier, full wireless coverage inside a building is expected. Radio frequency signals often cannot easily penetrate walls, elevators, and even windows in large buildings. The solution is low-power cellular antennas placed inside buildings to provide reliable service. There are other reasons in support of cellular systems inside buildings or structures. Sometimes the number of users inside a building like a convention center or sports facility exceeds the bandwidth of a single cellular tower. Thus, the solution is a "distributed" approach to providing full coverage that can handle a large amount of communications traffic. Distributed Antenna Systems (DAS) were developed to fulfill the requirement of providing reliable RF penetration and coverage throughout a facility.



Codes and Regulations

The National Fire Protection Association (NFPA) and the International Fire Code (IFC) have established working standards that outline minimum requirements, but local jurisdictions set their own local code which can deviate from the IFC or NFPA standards. Part of the code for building wireless coverage includes:

  1. The building shall have 99% floor area radio coverage in critical areas, such as the fire command center(s), the fire pump room(s), exit stairs, exit passageways, elevator lobbies, standpipe cabinets, sprinkler sectional valve locations, and other areas deemed critical by the authority having jurisdiction.
  2. A minimum inbound signal strength of -95dBm, or other signal strength as required by authority having jurisdiction, shall be provided throughout the coverage area.
  3. A minimum outbound signal strength of -95 dBm at the donor site, or other signal strength as required by authority having jurisdiction, shall be provided from the coverage area.
  4. Buildings and structures that cannot support the required level of coverage shall be equipped with radiating cable system or distributed antenna system (DAS) with FCC-certified signal booster, or both, or with a system that is otherwise approved, in order to achieve the required adequate coverage.
  5. Two sources of power are required:
    1. The primary source must be a dedicated AC line that complies with the NFPA Code 72.
    2. The secondary source must consist of a storage battery system capable of supporting 100% of operating capacity for 12 hours. The alternative source of secondary power (either a generator or battery backup) must also provide 12 hours of backup power at 100% of capacity. Either alternative must be approved by the Authority Having Jurisdiction( AHJ).

The standards discussed above must be adopted by a state or local jurisdiction in order to be enforceable. The standards adopted locally are usually strictly enforced, and a certificate of occupancy can be withheld if the minimum standards for signal coverage and backup power are not met. Most jurisdictions will run testing throughout a facility in order to validate that the DAS system meets or exceeds the local code. Additionally, local regulations take into account building size and density of people when determining what facilities must have a DAS system in place. The fact that these codes are in place shows the importance of back-up power. Without backup power during a power outage or some other emergency event, communications between first responders or occupants within a facility could potentially be very limited, thus putting personnel at considerable risk. Check local codes to verify battery backup requirements and runtime needed to meet the code.


Power Requirements of DAS Systems

Since DAS installations require longer battery backup times than usual, Minuteman is uniquely positioned to offer solutions that meet the stringent requirements.

Minuteman was the early pioneer in adding an external battery pack to a UPS in the market below 3000VA. Minuteman's first models with extended runtime capability debuted more than 27 years ago. Since then, our extended runtime products have established a reputation for ease of installation, exceptional value, and unmatched reliability.

Two sizes of battery packs are available, providing an unmatched level of customization and ensuring the perfect configuration can be achieved, no matter the demands. Minuteman's XL and EXL battery packs for Endeavor LCD and EnterprisePlus LCD Series UPSs provide a virtually unlimited amount of runtime potential thanks to their daisy-chain capability. This allows users and resellers to easily configure an affordable UPS solution for even the most challenging runtime requirements.

Solutions for DAS Wireless Applications

Large System Loads &
Ext. Runtime Applications

- Protection for sensitive equipment
- Keep large systems operating during outage to protect customers & clients
- Stay up-to-date on power with LCD status display
- Unlimited runtime with optional battery packs
View All Models & Full Specs
Large System Loads &
Ext. Runtime Applications

- Protection for sensitive equipment
- Keep large systems operating during outage to protect customers & clients
- Stay up-to-date on power with LCD status display
- Unlimited runtime with optional battery packs
View All Models & Full Specs
Large System Loads &
Ext. Runtime Applications

- Protection for sensitive equipment
- Keep large systems operating during outage to protect customers & clients
- Stay up-to-date on power with LCD status display
- Unlimited runtime with optional battery packs
View All Models & Full Specs
Larger Systems with
Extended Runtime

- Protect servers, switches, routers, access points
- Protect vital information systems from potentially damaging power anomalies
- Eliminate downtime after an outage; return to normal business operations faster
View All Models & Full Specs
Network-based
Management

- Manage UPS systems from anywhere via web interface
- Manage UPS systems as part of a Network Management System (NMS)
- Be notified of power events via SNMP traps or email notifications
View All Models & Full Specs
Programmable Relay Card
for notifications

- Protect servers, switches, routers, access points
- Protect vital information systems from potentially damaging power anomalies
- Eliminate downtime after an outage; return to normal business operations faster
View All Models & Full Specs
1-on-1 Support from Minuteman

Speak with a Minuteman Product Specialist

Have questions about building your power protection system? Our knowledgeable and friendly product specialists can help you select the proper solution for your needs, and even put you in touch with a distributor or retailer in your area - no pressure, no hassle.

Minuteman's business hours are M-F, 8:00 am to 5:00 pm central.

You can fill out our Call Request form to have a Product Specialist contact you directly.



 

 

 

About Us Comments Privacy Policy Subscribe Copyright Site Map
Minuteman's PowerBlog Minuteman on Facebook Minuteman on Twitter Minuteman on LinkedIn Minuteman on YouTube